Axocontrol Enclosure

controllers
#11

@krikor I’m looking into possibly getting one of these laser cut. What are those metallic looking clamps you seem to be using above the I/Os? Also any more photos from other angles?

#12

It is just a reflection as some of the material I selected for the laser cut is a bit transparent.
I will try to post some more pictures later.

#13

Hi all,
If you are thinking of making a case like the one shown,
@Krikor and you find it hard to find a place to be cut,
I have a Laser cutter, (in fact I sell acrylic enclosures for Axoloti, on eBay and Amazon :wink: ) ...
Now I'm waiting to receive an Axoloticontrol plate, which I kindly bought from Krikor, to create a new synth that I want to make ...
Also if you have some other design in DXF or SVG, you can send it to me to estimate the cost of cutting and shipping.
Thank's

#14

@krikor the PCB arrived this morning. well packed.
Thanks very much!
Now I have to find the rest of the pieces !! :smile:

#15

alright good to know @killor

#16

I'm gonna make a few mods to the enclosure file. the two screws on the back of the unit touch the 40 pin connector (no problem but it is not well aligned). Also the hole for the XY controller is a bit to the right up, I need to move it to the left down or just enlarge it a bit.

#17

Did you ever make these adjustments?

#18

I gotta double check, but it should be good.
I won't have time until this weekend.
I'm gonna replace the file when done, I will indicate it.

#19

I uploaded the new ones!
cheers

#20

Thank you so much for sharing this! I've just put it together, but I think I'm missing something to lock things in place, namely something which uses the middle holes and the cross shaped cuts. I'm completely new to diy, could you please tell me what to use with these?

#21

Hi, can you upload a picture?

#22

I'm using all the default parts that came with the AxoControl - as you can see the buttons are sunk in, but I can live with that :slight_smile:

Thank you!

IMG_2428.jpeg960x1280 270 KB
IMG_2426.jpeg960x1280 277 KB
IMG_2425.jpeg960x1280 271 KB

#23

The holes are for the screws

#24

6F4C962B-A42C-4E65-8E5E-48BDBC93A2B4.jpeg4032x3024 1.86 MB
70AEC01D-0D7A-4776-8932-6FA9BB3BD7DF.jpeg4032x3024 1.95 MB
1670F7A2-E636-43B9-8DA8-61DF2E51892F.jpeg4032x3024 1.86 MB
03A40D90-0490-4611-B15E-17D42D96D10C.jpeg4032x3024 1.91 MB

#25

Those are 10 or 12mm long I think

#26

Ah, thank you so much!!

#27

hi there - which one? 10 or 12? :slight_smile:

#28

I can’t remember but the 10 should be good as they are standard length.

#29

Here is my custom case with Axocontrol and 1.3in LED integration, adapted from some of the STLs files found here. I also made tall button caps as most are not tall enough for this case.

16240067594837422963063588091327.jpg3648x2736 1.42 MB

16240066960636876974938425698302.jpg3648x2736 1.55 MB

#30

@dborowik cool - how did you wire the oled? according to this post: https://sebiik.github.io/community.axoloti.com.backup/t/oled-screens-and-the-thonk-axocontrol-board/6428/5?u=moono this supposedly does not work ; )