thanks!
I wanted it to have some laser etched graphics, like yours, but it was out of my budget.
Anyone planning to make and sell an enclosure?
srodillof
#377
Naviow
#378
finally built a case for mine,
its a wooden dovetailed box with removable front and back panel, its designed to be modular for various other electronic music projects (2nd module is reverb) and its designed to be mobile hence the usb battery pack and the Sony speaker. The module plates are made from aluminum 'finger' plates from doors (cheap and easy to drill/cut) only wired up 8 analogue in at the moment waiting for more bits to arrive this week.
ghostly606
#379
Good job! I have been planning an almost identical set-up myself for a while, albeit not so mobile, as I had a 9U Eurorack case that no-one wanted to buy at a price I felt was reasonable. How thick are the module plates? Have you got a link?
Naviow
#380
Hi Ghostly, the finger plates come as 300mm x 150mm x 1.3mm thick, they can be cut in half with multiple 'scores' from a craft knife then snapped. They are really common and can be bought from DIY store etc but I got mine from Ebay here:
be aware that some have rounded edges which i didn't want and there are some odd sizes advertised so I bought enough for the whole case (and a spare 
) just in case).
1.3mm is fine for my small 'modules' but the longer 300mm ones are a bit on the thin side - I dont know if you have seen 'Look Mum No Computer' on Youtube ? he makes his own modules out of 2mm aluminum (and sprays them black) which would be better if you can find it. Another option I looked into was copper clad pcb board - might be an option
john
ghostly606
#381
Nice one, thanks! Will get some and give it a whirl! 
Oh yes, LMNC is my favourite channel, a bonkers genius!
lokki
#382
here is mine:
i wanted a compact pedal, so this is standard 1590BB Hammond pedal size. the holes are all made with a drill, a fretsaw and some filing. the "artwork" is a newspaper image and the "sparkling" topping in the lacquer is powder from the aluminium filing. had to break the axoloti apart of course. it is a tight fit, but it works. as of now it is a midi clock generator, selects different lfo waveforms on a connected blofeld and acts as a talkbox sound source and fx. (audio mono out to talkbox, from microphone to audio in, processing, audio out mono to mixer) yeah!! thanks to @SmashedTransistors for the OLED object.
some more pics, backside with most of the connections:
midi side:
gutshot, notice some filing on the axoloti to fit in the round corners of the enclosure. the midi part is under the right side while the oled is under the left side. the black tape holds an oled-alushield (to suppress unwanted noise from the oled, not sure if its necessary, but it does not hurt.) :
Can I power Axoloti with a normal USB charger?
killor
#383
Hello,
This week I designed and made a new wooden case for Axoloti and with the format factor of Korg Volca modules. 199 x 115 x 46 mm.
So it is possible to use the STAND available for Korg volca by the AXOLOTI user.
Axoloti case of Sale on eBay 
AlanMJackson
#384
Here's mine which as you can tell took me many many hours to make.
Another eurorack box - the Doepfer ones just fit, with a handy space for the battery 
There's some really inspiring cases in this thread, well done!
bo_peterson
#385
Just bought this one at Slöjddetaljer in Sweden: https://www.slojd-detaljer.se/sortiment/skapa-dekorera/produkter-att-dekorera/traprodukter/traskrin-4634
SmashedTransistors
#386
I wanted something more convenient for the String Module I'm designing than my usual cardboard stuff.
Thus, I bought a deluxe watch box.
And added an axoloti, 20 pots( and 3 4051), 2 switches and an OLED.
SmashedTransistors
#388
This is work in progress.
You can try the Help->Community/tiar/dev/InDev8 help patch to get an idea.
killor
#389
HI !!
I have sent again to the AMAZON stores some units of the Axoloti enclosure in the clear Acrylic version. (see the links of the previous publication.)
They should be ready for sale this weekend.
killor
#391
Hi !
I have created a new wooden enclosure design for AXOLOTI in AMAZON.
wooden case for AXOLOTI CORE
By the way I have already received the new Axoloti core board that
I ordered !! all perfect and very fast delivery ... !!
Thanks Johannes!
mrf
#392
cv gate io (calibrated bipolar from -10.66 to 10.66V) + leds, pots, buttons.
G1183G Enclousre
tele_player
#393
krikor
#395
I made an adaptation of @janvantomme enclosure to use with an axocontrol Kit, if anyone wants it, I uploaded the illustrator files here https://sebiik.github.io/community.axoloti.com.backup/t/axocontrol-enclosure/5514/5
Mindsetup
#396
Creating a new design for my axoloti. Had one axo for few years in a temporary enclosure, I've been letting ideas grow
Finally started the building phase few weeks ago:
This one is gonna be mainly drum machine with about 24 knobs for mixing and modifying the sounds.
I bought another axo few weeks ago, I think this kind of enclosure will be its new home as well. Its gonna be a noise/drone synth
Panels are copper. Next phase is lot of drilling and cutting the hole for the oled. After that some soldering and planning for the wiring.
Enclosure just about ready. Next potentiometer and oled attaching. Also need to make a bed for teensy and axo inside the enclosure.
Had to prototype the wiring of the pots few times to figure out a way simple enough. Still gonna have to route 24 signal wires to axolotis analog pins and teensy 3.6 pins.
Assembling and wiring:
Getting there!
