USB Midi Controllers

controllers
midi
usb
#93

Sorry, this has a USB hub hidden inside, and hubs are not supported...

#94

CME XKey Air 25 : all works :wink:
ok using USB cable (no BT LE) on to poly pressure heaven.

#95

Are you able to get BSP in Control Mode to send CC to axo objects? Mine doesn't seem to be able to.

#96

Perhaps the BSP and patch Midi channel are different?
(View menu->Settings)

#98

Thanks Johannes, turns out it was a problem with the BSP Midi Control Centre not being in sync with the device values. It all works now :smile:

#99

A post was split to a new topic: Bare Conductive's Touch Board : not working

#100

Gordius Little Giant.2
Working OK

Axoloti says: USB Device Attached
Axoloti says: PID: 800h
Axoloti says: VID: 16C0h
Axoloti says: Address (#1) assigned.
Axoloti says: Manufacturer : Gordius
Axoloti says: Product : LittleGiant
Axoloti says: Serial Number : 123412341234
Axoloti says: Enumeration done.
Axoloti says: This device has only 1 configuration.
Axoloti says: Default configuration set.
Axoloti says: Switching to Interface (#1)
Axoloti says: Class : 1h
Axoloti says: SubClass : 3h
Axoloti says: Protocol : 0h
Axoloti says: USB Host Input size requests : 40
Axoloti says: USB Host Input interval : 0
Axoloti says: USB Host Output size requests : 40
Axoloti says: USB Host Output interval : 0
Axoloti says: USB Host Output connected to 1 : 88
Axoloti says: USB Host Input connected to 1 : 88
Axoloti says: MID class started.

#101

M-Audio Trigger Finger( not Pro version)
Working ok.

Axoloti says: USB Device Attached
Axoloti says: PID: 117h
Axoloti says: VID: 763h
Axoloti says: Address (#1) assigned.
Axoloti says: Manufacturer : M-Audio
Axoloti says: Product : USB Trigger Finger
Axoloti says: Serial Number : N/A
Axoloti says: Enumeration done.
Axoloti says: This device has only 1 configuration.
Axoloti says: Default configuration set.
Axoloti says: Switching to Interface (#1)
Axoloti says: Class : 1h
Axoloti says: SubClass : 3h
Axoloti says: Protocol : 0h
Axoloti says: USB Host Input size requests : 40
Axoloti says: USB Host Input interval : 0
Axoloti says: USB Host Output size requests : 40
Axoloti says: USB Host Output interval : 0
Axoloti says: USB Host Output connected to 1 : 81
Axoloti says: USB Host Input connected to 1 : 81
Axoloti says: MID class started.

#102

Do the pads on the Akai LPD8 "latch" when using them to control parameters in an Axoloti patch or are they momentary on/off?

Also, has anyone tried a Novation Nocturn controller as yet? They seem to be class compliant as far as I can see.

#103

Just discovered that the Gakken NSX-39 Pocket Miku is compatible with the Axoloti. Only sends keyboard data and receives power from the Axoloti but it's so weird that it's kinda worth it.

Here it is talking to my Axoloti. Don't they look happy?

CdmeTQ_WoAAi3EJ.jpg large.jpeg1024x768 156 KB

#104

also curious about the novation nocturn. the size would be perfect and there are tons of 2nd hand ones floating around.. anyone who has one care to plug theirs in and find out?

#105

My English is bad.
Akai EWIUSB and the Midi module from Littlebits works great.
Komplete kontrol S25 no work (is not usb-midi class compliant).

#106

A post was split to a new topic: Nord Stage 2 midi not working

#107

Three controllers I've been using work to different degrees:

Korg nanoKontrol v1 - CC works fine, but no program change function and setting a button to be "Momentary" requires an on and off value which can result in a double value being sent out depending on how you are trying to use it.

Behringer X-Touch Mini - all works fine, program change functions work well but the Inc/+1 and Dec/-1 are mapped oddly by the editor software to be 1, 2, 3, 4, 5 etc on Inc but 127, 126, 125, 124 on Dec. Currently no way to change this.

Evolution X-Session U17 (not pro) - CC works fine, program change function works well with the Inc/Dec function behaving in a more logical up and down fashion than the Behringer. Ancient controller editor software (Enigma) does not appear to work with any of the various PC's and Mac's I have laying around but easy enough to set up using the on board controls.

#108

livid base I

working,including LED feedback and all.
BUT occasionally there are 'hanging notes' when playing the pads.

The pads are sending aftertouch or CC values when you hold them.
I've cross-checked this with the Max/Msp 'borax' - object , no hanging notes here.
I'll investigate some more...
it's possible that there's a BUG in the 'midi/kb/' objects,eventually the CC's are
overloading these.

BTW the 'base I' is on sale right now for less than 100 euro..

#109
#110

Linnstrument works fine with polychannel midi via DIN. Possible that some info is traveling too slow when lots of channels are selected for the poly mode.

USB polyphony has some issue and I will investigate.

#111

I had some good results by simply slowing down the data rate of the Linnstrument usb! I did notice an earlier thread posted here that mentioned issues even with a low data rate, but I didn't have issues.
Also can recommend to set the LI only to send the needed data or use a number of midi channels equal to your instrument polyphony.

#112

thats a really good point, that I forgot to mention... the reason is, my mpe implementation (and the poly expression) derive the voice idx from the midi channel, and I think by default the linnstrument rotates through channels (most of these controllers do this, though often its options... it allows release tails to ring out for as long as possible) .

as another option... rather than DIN which is slow, so requires thinned data, you can connect via the usb device port via a pc/raspberry pi. my experience of this, with the eigenharp/soundplane is this does not have the same speed restrictions as the usb host port appears to have.

@alexk, re throughput, see my update on this thread

#113

Axoloti also works with the Casio GZ-5. No aftertouch or anything else very much, but that's pretty much all you get with the GZ-5 with anything.

CgqWrQ8WwAIno_y.jpg large.jpeg1024x768 185 KB