USB Midi Controllers

[philoop]

the Launchcontrol works, but behaves sometimes a little strange, wich is not axolotis fault....

[anon5189335]

Great also saw the bigger brother lauch control XL.. seems like a great deal. 24 knobs, 8 slider, 16 buttons etc... for a around 200 dollars

[Illuminate]

Yamaha MX-49 is powered by the wall and actually increases the voltage by .2 when connected. I resolved all the midi issues and can now recieve midi on DIN with the yamaha plugged in. I think I may have just been an idiot and plugged something in wrong when testing the first time as everything seems to be working fine now. MX-49 still not USB midi compliant, but works great through DIN. sorry about that...

[Stoss]

Has anyone tried a Livid DS1 connected over USB. If someone has one I would love to know the results.

Thanks!

[Tobias]

nanoKey2 works as well (which might be obvious, but just to verify)

[Zygurt]

We can add the M-audio Oxygen 49 Mk III to the list.
Here's a link to a subpatch with all of the controls already mapped.

M-Audio Oxygen Mapped CC's subpatch (easily adaptable)

I opened my Oxygen 49 keyboard today to look at how much space is available inside, and found that there is the perfect space to mount the Axoloti inside. As a result I went through the process of creating a subpatch that will allow for easy connection of sliders, dials and buttons to future patches. The added bonus is that the keyboard is class compliant which leaves all of the IO on the Axoloti for future expansion. Below is the subpatch file. Things to note include buttons 1-8 latch to ei…

EDIT: added revision.

[johannes]

M-audio Oxygen 49

please specify the revision, there are several makes of Oxygen49

[klausnich]

Support for Behringer UMA25S?

The Behringer UMA25S is a MIDI and Audio USB Class Device, it usually works without any additional drivers on Windows and IOS Devices.
Connections to Axolotl is refused. Maybe because it is both in one and not possible to turn off the audio part.

Is there any chance to get it running on USB?

This is the console Output while connecting:
Axoloti says: USB Device Attached
Axoloti says: PID: 2036h
Axoloti says: VID: 451h
Axoloti says: Address (#1) assigned.
Axoloti says: Manufacturer : N/A
Axoloti says: Product : General Purpose USB Hub
Axoloti says: Serial Number : N/A
Axoloti says: Enumeration done.
Axoloti says: This device has only 1 configuration.
Axoloti says: Default configuration set.
Axoloti says: No registered class for this device.

[johannes]

Behringer UMA25S

Sorry, this has a USB hub hidden inside, and hubs are not supported...

[keyman]

CME XKey Air 25 : all works
ok using USB cable (no BT LE) on to poly pressure heaven.

[Eater]

Are you able to get BSP in Control Mode to send CC to axo objects? Mine doesn't seem to be able to.

[johannes]

Perhaps the BSP and patch Midi channel are different?
(View menu->Settings)

[Eater]

Thanks Johannes, turns out it was a problem with the BSP Midi Control Centre not being in sync with the device values. It all works now

[thetechnobear]

A post was split to a new topic: Bare Conductive's Touch Board : not working

[andybutler]

Gordius Little Giant.2
Working OK

Axoloti says: USB Device Attached
Axoloti says: PID: 800h
Axoloti says: VID: 16C0h
Axoloti says: Address (#1) assigned.
Axoloti says: Manufacturer : Gordius
Axoloti says: Product : LittleGiant
Axoloti says: Serial Number : 123412341234
Axoloti says: Enumeration done.
Axoloti says: This device has only 1 configuration.
Axoloti says: Default configuration set.
Axoloti says: Switching to Interface (#1)
Axoloti says: Class : 1h
Axoloti says: SubClass : 3h
Axoloti says: Protocol : 0h
Axoloti says: USB Host Input size requests : 40
Axoloti says: USB Host Input interval : 0
Axoloti says: USB Host Output size requests : 40
Axoloti says: USB Host Output interval : 0
Axoloti says: USB Host Output connected to 1 : 88
Axoloti says: USB Host Input connected to 1 : 88
Axoloti says: MID class started.

[andybutler]

M-Audio Trigger Finger( not Pro version)
Working ok.

Axoloti says: USB Device Attached
Axoloti says: PID: 117h
Axoloti says: VID: 763h
Axoloti says: Address (#1) assigned.
Axoloti says: Manufacturer : M-Audio
Axoloti says: Product : USB Trigger Finger
Axoloti says: Serial Number : N/A
Axoloti says: Enumeration done.
Axoloti says: This device has only 1 configuration.
Axoloti says: Default configuration set.
Axoloti says: Switching to Interface (#1)
Axoloti says: Class : 1h
Axoloti says: SubClass : 3h
Axoloti says: Protocol : 0h
Axoloti says: USB Host Input size requests : 40
Axoloti says: USB Host Input interval : 0
Axoloti says: USB Host Output size requests : 40
Axoloti says: USB Host Output interval : 0
Axoloti says: USB Host Output connected to 1 : 81
Axoloti says: USB Host Input connected to 1 : 81
Axoloti says: MID class started.

[pmj]

Do the pads on the Akai LPD8 "latch" when using them to control parameters in an Axoloti patch or are they momentary on/off?

Also, has anyone tried a Novation Nocturn controller as yet? They seem to be class compliant as far as I can see.

[iotar]

Just discovered that the Gakken NSX-39 Pocket Miku is compatible with the Axoloti. Only sends keyboard data and receives power from the Axoloti but it's so weird that it's kinda worth it.

Here it is talking to my Axoloti. Don't they look happy?

[wishniak]

also curious about the novation nocturn. the size would be perfect and there are tons of 2nd hand ones floating around.. anyone who has one care to plug theirs in and find out?

[biamau]

My English is bad.
Akai EWIUSB and the Midi module from Littlebits works great.
Komplete kontrol S25 no work (is not usb-midi class compliant).