USB Midi Controllers

controllers
midi
usb
#113

Axoloti also works with the Casio GZ-5. No aftertouch or anything else very much, but that's pretty much all you get with the GZ-5 with anything.

CgqWrQ8WwAIno_y.jpg large.jpeg1024x768 185 KB

#114

Has anyone had any luck with the APC 40? I haven't seen anything saying it doesn't work, but nothing proving it either. I'd love to pick up an Axoloti if it'd be compatible.

#115

not got one, but is it class compliant? if it is, then it should work , is it a Mk1 or Mk2 ?

the Mk2 states its USB Midi class compliant so should be fine.
the Mk1, a bit of searching, indicates it also is (albeit with a special handshake that apparently is only needed for Live), and Linux has no issues with it.

as of now, I think we have all USB midi class compliant devices working, with only 2 exceptions.
- one that had an internal USB hub, which we do not support.
- the Linnstrument, due to extreme volume of data, currently I'm awaiting feedback from owners if the 'low power' mode resolves this, as this was recommended by Linnstrument developer.

anyway, id give a good chance of working, as all looks ok, and other Akai devices are fine.

#116

It is the MK1. Thanks for the info. Seeing how many other Akai devices worked, i figured it would be ok too.

#117

Novation Bass Station 2 works via USB with no issues (with BS powered by its adapter) as a MIDI keyboard controller and some knobs sends CC (haven't figure out how to map the controls sending NRPN or two CC values yet)

#118

A post was split to a new topic: Building an instrument

#119

Akai Midimix reported as working as of 1.0.10 see here

#120

Novation Remote 25 Audio / X-Station:
Doesn't work (not class-compliant).

Novation MiniNova:
Doesn't work. Appears not to be class-compliant, which is disappointing for a relatively new device.

M-Audio Trigger Finger (first version, not the 'Pro'):
Works, but doesn't send out MIDI note-off events, which might limit usefulness.

a|x

#121

Miditech i2Control-25 works

#122

A few items I have tested and confirmed working (in no particular order):

Korg nanoKontrol2
Soulsby Synthesizers miniAtmegatron , this means..
Arduino MIDI/MOCO for LUFA (Arduni Uno MIDI hack)
Keith McMillen QuNeo
AKAI LPK25
iCON Cube Mi-3 (USB-Midi interface)
Waldorf Streichfett
Arturia Beatstep Pro (notable ground loop in my config, even with the supplied groundloop adaptor, did not try Axo DC power)
Novation LaunchpadPro
Elektron Analog Four
Dave Smith Intruments Tetra
Waldorf Blofeld Keyboard
Arturia MicroBrute

#123

A post was split to a new topic: USB hub support

#124

2 posts were split to a new topic: Novation Nocturn 25 - working?

#125

Livid Code Version 1 using version 1.276 editor software seems to work fine, Axoloti powers it fine and it just works :slight_smile:

#126

arduino micro with usb midi (arcore) also works!

#127

Quick tests with the Midi Fighter Twister work perfectly!

#128

Likewise with the Livid Brain Jr. control board -- quick tests reveal no issues!

#129

Just tested the Denon DN-SC2000 DJ MIDI controller and it partly works.

The pitch fader doesn't work because it's 14bit MIDI.
Buttons also don't seem to work.
Jog wheel and rotary encoders work fine.

#130

2 posts were split to a new topic: Icon iStage MIDI-Drumpad - compatible?

#132

A post was split to a new topic: iOS app : midi controller pro w/ Axoloti

#133

a quick 'reminder' / plea - this topic is only for reporting usb controllers that work with axoloti.
(we use it as a way to keep a list of known working controllers... so keeping it 'clean' is useful to us, plus its a massive thread for users to search :slight_smile: )

if have questions about a controller working or not, or how to make it work, or any other questions about controllers with axoloti please raise a separate topic.

also, axoloti only supports USB midi class compliant devices, so no need to report non-compliant devices here, we know they wont work , to make them work would be a separate topic as a 'feature request'