259 inspired polyphonic synthesizer

#4

Sounds beautiful, can you share it?

#5

Sounds fantastic, it would be awesome if you could share the patch. Thank you!

#6

How did you create that tanpura Sound? please!!!

#7

That's what's inside a single voice.
Keep in mind that I've changed the patch a little bit since recording the SC track. (added glide for modulator, changed the amp envelope shape to exponential, redesigned the waveshaper for primary oscillator and added option to control it with modulator envelope)

complexvoice.JPG1043x765 116 KB

I will share the patch including Axocontrol adaptation soon

#8

Great! Looking forward to it!

#9

Patch is available at my github:
AxoControl_Complex_Poly_V1.4.rar

Limited the voice count to 3 (75% DSP used). Modulation depth is linked to mod wheel, everything else control Axoctrl knobs, functions are as follows:

Page 1 (left LED on):

  • Knob 2 - mod osc wavefold (sine - fold 100%)
  • Knob 4 - mod osc glide
  • Knob 5 - mod osc octave (+/-4 in relation to primary osc)
  • Knob 6 - primary osc shape (full ccw - saturated (square), middle sine, full cw - wavefold 100%)

Page 2 (middle LED on):

  • Knob 2 - mod envelope sustain level (0-100%)
  • Knob 4 - mod envelope attack time (2,41ms - 3,91s)
  • Knob 5 - mod envelope decay time (2,41ms - 3,91s)
  • Knob 6 - mod envelope release time (2,41ms - 3,91s)

Page 3 (right LED on):

  • Knob 2 - amplitude envelope sustain level (0-100%)
  • Knob 4 - amplitude envelope attack time (2,41ms - 3,91s)
  • Knob 5 - amplitude envelope decay time (2,41ms - 3,91s)
  • Knob 6 - amplitude envelope release time (2,41ms - 3,91s)

No matter what page:
Button A - decrease page number
Button B - increase page number
Button C - toggle for mod env control over primary osc wavefold depth
Knob 1 - mod osc tune (+/-7 semitones)
Knob 3 - master volume
Joystick left-right - mod osc pitch bend (+/- 3 semitones)
Joystick button - toggle hard sync mod osc to primary (LED on, off)

Should work fine. Let me know if you will encounter any errors :rocket:

Multiple pages of parameters for Axoctrl
#10

Thanks for sharing.
I have not tried it on the computer but loaded the axocontrol patch onto my axoloti right away and played it with a small usb midi keyboard. However it seems like one osc is lost? I also think so because turning knob 1 does not have an effect at all for me.

Or is it a setting regarding the modwheel? I do not have one on my keyboard, so cannot play with that depth setting...

#11

Phase modulation amount (of mod osc over primary osc) is controlled by mod wheel. Most keyboards do have a mod wheel on board but if yours don't - you can easily swap it with another function using patcher

#12

The sound in the example reminds me of the Crumar GDS / DKI Synergy. Great stuff!

#13

Ah, thanks for your reply. I'd probably remap it to knob 3 as the output control is not so crucial for me.
Unfortunately I still am a bit dumbfolded when it comes to editing or even trying to get my own patches done, I understand how the controls are mapped out but cannot see the modwheel configuration at all in that patch. Any pointers are highly appreciated.

#14

Personally - I would sacrifice glide :stuck_out_tongue: Originally I thought it would be more useful, but still decided not to drop it. Master volume is useful to avoid distortion when holding all voices on (i.e. chord). Mod depth is a single knob connected to the voice module in the Axocontrol patch :slight_smile:

#15

I can't seem to open the patch. I can open the sub patch look at it, fiddle with it.

Loading the main patch - nothing happens! It does say in the log that it's loading my prefs file each time I try to load the patch. Windows 10 shows another Axoloti window open - which doesn't really exist.

Hrmm.

#16

Had the same issue. The windows does exist, only outside your screen. Hoover your mouse over the axoloti-icon on your tastbar. The hidden windows should be visible as a thumbnail. Rightclick on the thumbnail and click move. Now move the windows with your arrow keys. The windows should appear somewhere...

Good-luck :wink:

#17

Oh, yup. I seemed to be experiencing that issue without noticing it.

I wonder how that happened :confused: scratches head

Your fix worked right away and I was able to see the patch.

Didn't manage to make any sound - oh well - next time.

#18

You need to tweak the amp envelope parameters as by default it is set do 2,41ms attack and 2,41ms decay with 0% sustain (minimal values)

#19

In the meantime I've ported my synth to Axoctrl.
Now I can have a visual indicator of each parameter value on screen. See demo below:


I went with bars for now but the value could be shown as an integer instead.
#20

Hey @maceq687! Just got an Axoctrl as well. Would you mind sharing your adapted patch for AxoCtrl? Relativity new to Axoloti but would like to achieve a Pages state like your video shown.

#21

It's on his Github, link is in message from March '17

#22

Yeah, thanks! I was referring to the AxoCtrl version, but I’m already playing with it. Thanks!

#23

Ahh, I confused HoHum axoctrl with MTM axocontrol, and so did the author of this patch.

Adaptation was simple, correct?